CE Certified Lightning Protection ProductsExporting to 27 Countries Worldwide19+ Years of Engineering ExcellenceFree Technical Consultancy AvailableESE Active Lightning Rods — NFC 17-102 & IEC 62305 CompliantNew: ORBetter® Earthing Enhancement SolutionCE Certified Lightning Protection ProductsExporting to 27 Countries Worldwide19+ Years of Engineering ExcellenceFree Technical Consultancy AvailableESE Active Lightning Rods — NFC 17-102 & IEC 62305 CompliantNew: ORBetter® Earthing Enhancement Solution
Electromechanical Counter VIRTU ELECTROMECHANICAL LIGHTNING STRIKE COUNTER by ORBITAL
NFC 17-102 CE Certified IP65 100kA Rated
Lightning Strike Counter

VIRTU ELECTROMECHANICAL LIGHTNING STRIKE COUNTER

Records every lightning strike event on any protection system. No external battery required — powered by the strike current itself. Waveform 100kA 10/350µs. IP65 rated. NFC 17-102 compliant.

Manufacturer direct — no intermediaries. Ships from Izmir, Turkey worldwide.

The VIRTU is ORBITAL's electromechanical lightning strike counter — an essential component of any compliant lightning protection system. Installed in-line on the down conductor, the VIRTU records every lightning strike event that passes through the system, providing the documentation required for maintenance records under NFC 17-102.

The VIRTU requires no external battery. It is powered entirely by the current of the arrested lightning strike — the same current pulse it is measuring. This makes it completely maintenance-free in terms of power supply, eliminating any risk of counter failure due to depleted batteries in remote or difficult-to-access installations.

The 6-digit display is configurable from 3 to 7 digits per client preference. The IP65-rated polycarbonate enclosure protects the mechanism from weather, dust and moisture in all outdoor environments. Compatible with all ORBITAL ESE lightning rods and down conductor types.

⚡
No Battery Required
Powered by the strike current itself — completely self-sufficient. Zero maintenance required for power supply.
🔋
100kA Waveform Rated
Tested to the 10/350µs waveform at 100kA — the same waveform used for NFC 17-102 system design.
🏗️
IP65 Weather Protection
Sealed polycarbonate enclosure rated IP65 for outdoor installation in all climates.
🔬
Configurable Display
6-digit default, configurable 3–7 digits per project requirements.
🌊
Field-Testable
Function verifiable with the ORBITAL ORB-X Strike Counter Test Unit without removal from installation.
✅
NFC 17-102 Compliant
Meets all requirements for strike counter installation under NFC 17-102 and IEC 62305.
Technical Specifications
Operating PrincipleElectromechanical — no battery required
Power SourcePowered by arrested lightning strike current
Current Sensitivity1500A — 8/20µs impulse
Waveform Rating100kA 10/350µs
Display6-digit mechanical counter (configurable 3–7 digits)
Ingress ProtectionIP65
EnclosureHigh quality polycarbonate
MountingDown conductor inline — all conductor types
Compatible TestersORBITAL ORB-X Strike Counter Test Unit
StandardsNFC 17-102, IEC 62305
CE MarkingYes
Warranty5 years
Mounting Position
Install the VIRTU in-line on each down conductor between the ESE lightning rod and the earth termination. NFC 17-102 requires one counter per down conductor. Position at a height accessible for reading and periodic inspection — typically 1.5–2m above ground level.
Electrical Connection
The VIRTU connects in series with the down conductor — both incoming and outgoing conductor connections must be secure and corrosion-free. No power supply connection required.
Periodic Maintenance
At each scheduled inspection, record the counter reading in the installation maintenance log. Test counter function using the ORBITAL ORB-X Test Unit. Replace if the counter does not respond to the test signal.